The GP series control valve is an electronic pressure regulator designed to precisely control the pressure of gaseous media proportional to an electronic signal in pressure ranges up to 1000 psig (69 bar(g)).?gp 系列控制閥是一種電子壓力調節器, 用于精確控制與電子信號成比例的氣體介質在高達 1000 psig (69 bar (g)) 的壓力范圍內的壓力壓力。

The GP series can be teamed with a variety of one-to-one ratio high pressure volume boosters for even greater flow. When using avolume booster, the GP2 can be used to achieve higher accuracy by compensating for the hysteresis of the mechanical pilot operatedregulator. GP series product comes with a monitor output signal. This output is an electrical signal originating from the internal sensor used in the control circuit of the GP1 valve. On GP2 units, this signal originates from the external transducer. This allows the system parameters to be monitored and provides a signal for data acquisition needs. The output of this signal can be configured to either 0-10Vdc or 4-20mA.?gp 系列可以與各種一對一比高壓體積助推器配合, 以獲得更大的流量。當使用 avolume 助推器時, gp2 可通過補償機械先導操作調節器的滯后性來實現更高的精度。gp 系列產品配有顯示器輸出信號。此輸出是源自 gp1 閥門控制電路中使用的內部傳感器的電信號。在 gp2 單元上, 此信號來自外部傳感器。這使得系統參數可以被監控, 并為數據采集需求提供信號。此信號的輸出可以配置為0-10vdc 或4-20ma。

? Precision pressure control from vacuum to 1000 psig without the need for a ratio amplifier
? Consumes no air in steady state
? External sensor closed loop option available
? Fast, accurate, and precise high pressure control of media
? Mounts in any position

·從真空到 1000 psig 的精確壓力控制, 無需比例放大器
·在穩定狀態下不消耗空氣
·提供外部傳感器閉環選項
·快速、準確、精確的介質高壓控制
·安裝在任何位置

[pdfjs-viewer url=”https%3A%2F%2Fydzhly.com%2Fequilibar%2Fwp-content%2Fuploads%2Fsites%2F311%2F2019%2F01%2FEquilibar-GP-Electronic_Pressure_Regulator.pdf” viewer_width=100% viewer_height=1360px fullscreen=true download=true print=true]