Equilibar back pressure regulators?are an excellent candidate for customers using dome-loaded back pressure regulators (BPR’s) such as the?Mity-Mite. The Mity-Mite BPR is an excellent control valve and has many successful applications. However, the Equilibar? back pressure regulator offers several distinct advantages over the traditional Mity Mite design:?equilibar 背壓調節器是使用圓頂背壓調節器 (bpr) (如 men-mite) 的客戶的絕佳選擇。men-mite bpr 是一個優秀的控制閥, 有許多成功的應用。然而, 與傳統的 mity mite 設計相比, equilibalib?背壓調節器具有幾個明顯的優勢:

• Through the use of?Kalrez FFKM o-rings, the Equilibar Research Series regulators can operate up to 300C and can be cycled repeatedly without leaks?通過使用 kalrez ffkm o 形圈, equilibar 研究系列調節器可以運行高達 300C, 并且可以在沒有泄漏的情況下反復循環
• Standard designs available to 6000 and 10,000 psig?標準設計可容納6000和 10, 000 psig
• Low dead-volume (approximately 0.2 ml) using 1/16″ HPLC tube fittings?低死量 (約0.2 毫升), 使用半 “hplc 管件
• Wide variety of diaphragms available (PTFE, PEEK, SS316L, Hastelloy C276, Polyimide)?提供多種隔膜 (聚四氟乙烯、peek、ss316l、hastelloy c276、聚酰亞胺)
• Improved precision, even with two-phase flow?即使采用兩相流, 也能提高精度
• Equilibar BPRs are available in Hastelloy C and exotic allows such as titanium, zirconium, and PEEK?equilibar bpr 在 hastelloy c 和異國情調的允許, 如鈦, 鋯, 和 peek
• BPRs are typically in stock for shipment within one week, bpr 通常有庫存, 可在一周內裝運

While the Mity-Mite and the Equilibar back pressure regulators work in a fundamentally similar way, the unique design of the Equilibar gives it much more sensitivity, especially in the low to medium pressure range. Because the Equilibar diaphragm is thinner and more supple than the Mity Mite, it can be used at very low pressures (less than 1 psig, or in the millibar range). Replacement diaphragms and other spare parts for Equilibar BPR’s are available in as little as 24 hours.?雖然 mig-mite 和 equilibar 背壓調節器的工作方式基本相似, 但 equilibar 獨特的設計使其具有更高的靈敏度, 尤其是在中低壓范圍內。由于 equibar 隔膜比 mity mite 更薄、更柔軟, 因此可以在非常低的壓力下使用 (小于 1 psig, 或在毫巴范圍內)。equibibar bpr 的更換隔膜和其他備件僅在24小時內提供。

[pdfjs-viewer url=”https%3A%2F%2Fydzhly.com%2Fequilibar%2Fwp-content%2Fuploads%2Fsites%2F311%2F2019%2F01%2FEquilibar-Mity_Mite-Back_Pressure_Regulator.pdf” viewer_width=100% viewer_height=1360px fullscreen=true download=true print=true]