Description
Position sensor utilizing the Hall effect. Output is noise-free differential voltage proportional to the position of a magnetic target.
It is designed to accommodate the automotive under-hood environment and is resistant to temperature extremes, petrochemicals and other automotive chemicals, severe vibration and shock.
The sensor measures 2,2 mm in diameter and 3,5 mm in length. It is available in various wire lengths and custom configurations.
Also available is a sensor signal conditioner that amplifies the sensor signal and removes the large static signal generated by the magnet. It also provides a digital proximity signal with separately configurable beginning and end trigger points.
Sensor (Blue Wire)
| Part Number | Description |
| ASM 470010-* | 300mm wire length |
| ASM 470011-* | 600mm wire length |
| ASM 470013-* | 1200mm wire length |
| ASM 470014-* | 1500mm wire length |
Sensor (Yellow Wire)
| Part Number | Description |
| ASM 470001-* | 300mm wire length |
| ASM 470002-* | 600mm wire length |
| ASM 470004-* | 1200mm wire length |
| ASM 470005-* | 1500mm wire length |
Specifications：
Operating Voltage：9-24 Vdc Supply
Current：2milliAmps
Magnetic Flux Density：no limit
Common Mode Voltage：3.6 to 4.6 Volts
Magnetic Sensitivity：1.35 to 2.75v/kGauss
Frequency response：25 kHz
Offset vs.Temperature：0.3 mV/° C
Sensitivity vs. Temp：-3 mV/kG/° C
Output Resistance：800 Ohms
Operating Temperature：-40 to +125°C
Storage Temperature：-65 to +150°C
Vibration：100g