PipeTEC | Corona treatment of jacket pipes管道內壁電暈處理

2015年1月4日

產品介紹：

Pipe tec是專門對需要粘附PUR泡沫保溫材料的管道進行電暈處理的。

Pipe tec必須完全整合到擠壓生產線中，才能確保一個非常高水平的表面處理。

一般認為，未經處理的管道內表面將導致發泡時產生氣穴，這將導致冷凝并最終導致管道失敗。

在進行PUR發泡前對管道內壁進行表面優化。

根據管道不同的尺寸和差別，tantec提供了兩種不同的電極，刀鋒式不銹鋼電極一般用來處理內壁，但是對于較大的管道，不銹鋼刷式電極是一個更好的選擇。

磁力保持內電極系統與刀鋒電極的聯合，外徑一般為630mm，刷式電極必須要線路連接。

 

FEATURES:  
High power treatment Dedicated electrodes for each single pipe dimension ensures optimum treatment results.
Easy to operate Just install the correct electrode dimension.
Fully integrated into extrusion line Fully integrated into the extrusion line, before the saw.
Flexible design Same set-up for all pipe dimensions.
No ground reference The treatment follows even without the need of a grounding of the inside electrode.
Magnet holder system Inside electrodes up to OD 630 can be kept in position by a magnet holder system.
Pipe dimensions All pipe dimensions from 75-2100 mm available.
Dual polarity Offers 2 time treatment for optimised results.
Technical Specifications PipeTEC
Mains voltage and frequency 230 VAC 50/60 Hz
Output voltage/power 2 x 40 kV/max. 2000 Watt
Power supply HV-X plasma generator series
Line-Speed 0.1-10 m/min.
Treatable materials PE, PP and others
System type Table top for full integration into extrusion line
Exhaust Ozone filter system
Regulation compliance CE – ROHs – WEEE