描述：專用設計的雙齒切割刀，可以保證切割力的精確集中，確保每組樣品的切口位置在每次切割運行中都相同. 主要用于塑料聚合體材料樣品準備,切割速度和進料速度可調,用于不同材料的切割條件的建立.裝置有微高度調整和切口深度刻度盤指示器確保切口深度被精確地控制. 特征： 高級專用微處理器控制 光學外觀表面，鉆石鋒口雙齒切割輪 槽口深度刻度顯示比較儀: 精度：±0.01mm 滑動距離刻度顯示,比較儀 微調槽口深度 標準槽口深度設定塊 用于測試樣品的固定夾緊裝置 直線往復滑行 方便的液晶顯示讀數,觸摸鍵 切割速度：350rpm-2000rpm可調 一次最大加樣：16個（4mm） 用于不同材料的切割速度存于存儲器中 公制或英制可由存儲器中選定

1.儀器遵循的標準和規范

1.1 符合塑料聚合物樣品制備要求

1.2 制備出的樣品符合ASTM D256、ISO 179、ISO 180標準缺口

2.供貨范圍和工作范圍

2.1供貨范圍和工作范圍包括設備本體和附屬的設備、儀表、電氣裝置、設備設計和服務以及技術資料和質量證明文件；

2.2賣方提供的設備和輔助系統應能完全滿足中心實驗室所在地氣候條件下正常穩定的操作要求；

3.產品主要技術參數和數據

4.設備安裝和使用條件

4.1電氣安裝條件： 電源：220VAC 50Hz 功率：500w

4.2環境要求 工作環境溫度和濕度：常規實驗室要求即可

4.3公用工程要求：實驗室臺面放置。

4.4主機尺寸：56×38×25（cm）

Product Description
The Auto Cycle Notching Cutter. has been designed to machine a very precise stress concentration notch in test specimens to ensure that breakage of the specimen takes place at the same section each time a test is carried out. Mainly intended for use with plastic polymer materials, the variable speed range of the cutter and traverse feed enables the optimum cutting conditions to be established for each different material

The apparatus is capable of producing notch profiles to all International test standards, such as ASTM D256, ISO 179 and 180. The cutters are made from tungsten carbide which is an extremely hard and durable material. The cutting edges are optically profile ground to very close tolerances. Different cutter profiles are available to suit standard and special notch requirements.

The Dual Tooth Cutting Wheels are made from tungsten carbide with cutting edges that optically ground to very close tolerances. The standard wheel fitted to the apparatus is the 0.25mm radius cutter. However 0.1mm and 1.0mm radius, and 0.8mm and 2.00mm ?U? notch cutter wheels are available. Ray-Ran is also able to offer wheels to customers specifications if required.

Standard features include
Advanced dedicated microprocessor control, Optical profile ground and diamond lapped dual tooth cutter wheels, Notches to any International test standard including Izod, Charpy, “U” and “V” notches, Notch depth dial indicator comparator, Slip gauge to set up the dial indicator comparator to accurately measure the remaining width under the notch, Micro adjustment notch depth, Standard notch depth setting blocks
Multi-sample loading, Setting rail forming an integral part of the vice to centralise test samples, Variable cutter speed with memory feature, Cutter speed range from 350 rpm to 2000 rpm, Anti-vibration linear motion slide, Variable metric and imperial traverse speeds with memory feature, Traverse speed range from 0.081 mm/rev to 1.0 mm/rev (0.003 in/rev to 0.04 in/rev), Fast return traverse speed, Easy to read digital speed liquid crystal display, Touch membrane keypad, Easy clean removable waste tray, Fully traceable certificate of calibration, Product user manual, CE mark of conformity, 1 year return to base warranty.

Test Description
Adjusted the settings for the notch depth and central position. Notch a test sample and measure notch depth. If necessary, make any fine adjustments. Multiple samples can now be notched.

Part Numbers
RR/NC – Auto Cycle Test Sample Notching Cutter. NC 051A – 0.100mm Radius Cutter. NC 051B – 0.250mm Radius Cutter. NC 051C – 1.000mm Radius Cutter. NC 051D – 0.800mm “V” Notch Cutter. NC 051E – 2.000mm “V” Notch Cutter.

Complies with Standard(s)
ISO 180, ISO 179, ASTM D256