BIM Battery impedance tester 19.999 mΩ

Battery impedance tester 19.999 mΩ | BIM 蓄電池阻抗測試儀19.999米Ω| BIM
Battery impedance tester 19.999 mΩ | BIM 蓄電池阻抗測試儀19.999米Ω| BIM

Characteristics
特點
Test type:
試驗類型:
battery impedance
電池阻抗
Description
描述
Operation is fast and simple. Just press the spring-loaded probes onto the two poles of the battery. After 1.5 seconds, the unit beeps (indicating good contact) and displays the battery voltage and either the number of siemens or milliohms, depending on the knob setting. The display continues to show these numbers after the probes are removed; it resets only when the probes are pressed onto the next battery. The impedance and voltage of any battery between 1.2 and 60 volts can be read. Because of the wide range of voltages, even single low-voltage cells, such as NiMH, can be measured. The manufacturers of some batteries specify impedance in milliohms while other specify in siemens (one divided by the resistance in ohms). This meter will display both types of impedance for any given battery. Accuracy is /- 2 of the value.
操作快捷簡單。只需按下彈簧探針到電池的兩極。1.5秒后,單位的嗶嗶聲(表示接觸良好)和顯示電池電壓和數西門子或毫歐,根據旋鈕設定。顯示繼續在探頭刪除顯示這些編號;將只有當探針壓到下一個電池。在1.2和60伏之間的任何電池的阻抗和電壓可以讀取。由于廣泛的電壓,即使單個低壓細胞,如鎳氫電池,可以測量。一些電池廠家指定阻抗毫而其他指定西門子(一個除以電阻歐姆)。該儀表將顯示這兩種類型的阻抗為任何給定的電池。準確度/ – 2的值。

Battery impedance tester 19.999 mΩ | BIM 蓄電池阻抗測試儀19.999米Ω| BIM


Related posts