的EZ傾斜- 2000- 2先的可編程雙/單的線性模擬/數字出傾斜模塊是圍繞一個先的CMOS微處理器定制的狀態。 2“× 2”印刷電板組的同時提供了模擬寬制和RS – 232傾信息最多兩傾斜。 模塊是完全為NULL和增益溫度償。 系統包括全系列的每瓦和兩個件可值檢測器的線性校正。 在此置中模塊利用SX型產品系列SX – 010D – LIN或SX的- 015D – LIN或SX的- 030D – LIN或SX的- 060D – LIN或SX的- 070D – LIN的單線性模式單一傾傳感器并提供一種經濟可的傾斜檢測決方案為卓的并發優秀半山線性圍寬分率復性和對稱性力的應用。 堅固的結構使些傳感器常的精度為眾多的OEM軍事醫學光學汽測儀對動化機器人技術和施工度測的應用場合。 的EZ傾斜- 2000- 2包括兩個完全可編程的值檢測線是什么用戶置俯仰和橫滾水平敏感報。 創新的四個安孔體積小便于安簡單。 用于危的應用傾斜傳感器可程位置。 模擬和PWM出為完全件可編程并更新每個啟用每個周期。 模擬出圍是最的4Vdc并籌建全套度圍1Vdc有底有。 PWM將出1090的關稅定度圍在37Hz率周期基地。

EZ-TILT-2000 rev-2 advanced programmable dual/single axis LINEAR Analog/Digital output tilt module is built around a customized state of the art CMOS Microprocessor. A 2″x 2″ assembled PCB provides concurrent Analog, PWM and RS-232 inclination information up to two axis of tilt. The module is fully temperature compensated for NULL and GAIN. The system includes full range linearity correction for each axis of tile and two software adjustable threshold detectors. In this configuration the module utilizes SX type (SX-010D-LIN or SX-015D-LIN or SX-030D-LIN or SX-060D-LIN or SX-070D-LIN) single axis LINEAR inclination sensors for single axis mode and provides an economical and reliable tilt sensing solution for applications requiring superior Nulling capabilities with concurrent excellent Mid-Wide range LINEARITY, resolution, repeatability and symmetry. Rugged construction make these sensors perfectly suitable for numerous high precision OEM, military, medical, optical, automotive, range finder, alignment, automation, robotics and construction angle measurement applications. EZ-TILT-2000 rev-2 also includes two fully programmable level threshold detector lines what allow the user to set level sensitive alarms for pitch and roll. Innovative design, four mounting holes and small size facilitate uncomplicated mounting. For hazardous applications tilt sensors could be remotely located. Both Analog and PWM outputs are fully software programmable and are updated each read cycle for each enabled axis. The analog output range is top limited by 4Vdc and bottom limited by 1Vdc for the full set angular range. The PWM will output 10% to 90% duty cycle for the set angular range at base frequency of 37Hz.