的EZ檢測- G是一種低成本先的微處理器控制的全方位度檢測模塊上的所有應用程序精確和可復的檢測是必的傾斜類型使用。 的EZ檢測- G是一個2“× 2”模塊夠探測到從水平方向的度位置偏差為+ -60 arcdeg度圍。 模塊包括檢測算法以最大度地減少報的激活可發生由于各種環境的變化。 包括內電源管理和低待機電流。 出是一個標準的TTLCMOS或根據求??在npn型晶體管的電極開的置。 8國團的包括硬件可檢測水平[包括一個電位器]和我檢測的串信用PC機在600到19200波特率標準終端模式的端口。 模塊可以操作的DX – 008D傳感器一+ -20 arcdeg傾斜圍的靈敏度。 置可以產生一個小的3個端子或將納入到未來的盆栽模塊。 模塊將出只期值水平沒有到。 如果事件值時出將變為1。 后低于值水平方向回出回到0。 當使用的DX – 008D傳感器的使用小度的檢測是可的。 定義值的校準和置索取。 所有數據生成的DX – 045D傳感器

EZ-DETECT-G is a LOW COST advanced microprocessor controlled Omni-directional angle detection module to be used on all types of applications where accurate and repeatable detection of tilt is required. EZ-DETECT-G is a 2″x2″ module able to detect angular position deviations from HORIZONTAL orientation in a +-60 arcdeg angular range. The module includes error detection algorithms to minimize false alarm activations which may occur due to various ambient changes. The design includes internal supply regulation and Low stand-by current. Output is a standard TTL, CMOS or ( upon request ) NPN transistor in an Open Collector configuration. The G design includes 8 hardware selectable detection levels [GV includes a Potentiometer] and a self detecting SERIAL communication port for PC communication via standard terminal mode at 600 to 19200 Baud rates. The module could operate with DX-008D sensor for higher sensitivity in a +-20 arcdeg tilt range. The unit could be produced as a small potted module with 3 terminals or to be incorporated into future designs. The module will output logic 0 as long as the threshold level is not reached. If the event that the threshold is crossed, the output will change to logic 1. Upon the return of the orientation below the threshold level, the output returns back to logic 0. When used with DX-008D sensor, detection of smaller angles is possible. Custom threshold calibration and setup available upon request. All data was generated with the DX-045D sensor