標準兩個由度的單片模塊的傾斜程度是建立在一個先的CMOS單片機定制的狀態。 種微小的SO18 -片或DIP – 18定制的成電是提供信息的雙傾傾斜續在一個標準的RS – 232與8位分率格式傳感器的力。 一個加的模擬入17是可的溫度或任何其他環境監測或入出校正利用現有。 單位信“終端”在Windows模式或利用定義件的DX – 232 – A是每個單NO的用。 單片換模塊是完全為大型OEM如擬實境玩具汽算機和消電子市場使用。 IC或價模塊可以與任何操作雙電傾斜傳感器。 它可與由組和演示件或級終端模式下。 是完全對示的粘度的影響和/或模塊的響應的傾斜平均合。 特殊的測實如果傾斜傳感器包括一個我測以確在??上電或復位傳感器的存在。 價單位是在1.5 × 1.5寸的PCB bult從標準9Vdc細作。

The standard two degree of freedom single IC tilt module is built around a customized state of the art CMOS Microcontroller. The tiny SO18-SMD or DIP-18 customized IC is capable of providing continuous inclination information for dual axis tilt sensors in a standard RS-232 format with 8 bit resolution. An additional analog input on pin #17 is available for optional temperature or any other environmental input used for monitoring or correction of the output. Unit communicates through “TERMINAL ” mode in Windows, or by utilizing custom software DX-232-A, which is provided at NO cost with each order. Single IC conversion module is perfectly suitable for large OEM markets such as VIRTUAL REALITY, TOYS, AUTOMOTIVE, COMPUTER, and CONSUMER ELECTRONICS. The IC or the EVALUATION module is able to operate with any Dual axis Electrolytic tilt sensor. It is available assembles and operates with the free demo software or via the hyper terminal mode. It is perfectly suitable for visual demonstration of the influence of viscosity and/or averaging on the response of the tilt module. Special test confirms if a tilt sensor includes self test to confirm sensors presence on POWER UP or RESET. The evaluation units is bult on 1.5 x 1.5 inch PCB, and operates from a standard 9Vdc cell.