Application:
The FTM unit is mainly used for the treatment of plastic and metal moulded parts,
sheeting and foils can also be treated.
The device is very suitable for testing operations (laboratory) and small series or standby and repair use.

Design:
The device comprises a mobile pneumatic and electric housing. A burner which is to be manually guided
is connected to the device by means of a flexible tube with a standard length of 3m.
The burner is of a light-weight design and is equipped with a Piezo igniter which is integrated in the handle.
The burner can be replaced by an annular burner by means of plug and screw couplings if special grooves
are to the treated. The air supply is obtained from an installed blower which enables the flame output to
be adjusted to between 30% and 100%, for example. Signal lamps for the operational status and buttons
for the adjusting of the output are mounted on the front of the control system. An additional shelf can be
mounted on the device for the burner, as can a balancer be used in order to fix the tube in position.

Technical Data:
Power supply: 230/400V, 50-60 Hz, 700VA
Treatment width: Standard 100mm/max. 200mm
Standard tube length: 3.0m as standard
Device dimensions (WxDxH): 550x525x600mm
Weight: 30kg