Concrete moisture meter / capacitive / surface-mount / with digital display BTS-5000 混凝土表面水分儀/電容/數字顯示bts-5000安裝/

Characteristics
特點
Measured material:
測量材料：
concrete
混凝土
Technology:
技術：
capacitive
電容
Mounting:
安裝：
surface-mount
表面貼裝
Other characteristics:
其他特點：
with digital display
數字顯示
Description
描述
For continuous moisture measurement in sand and aggregates
連續水分測定在砂和骨料中的
? Nowadays, the concrete quality is of vital importance for the industrial production process. In order to meet the increasing quality demands, it is essential to control and regulate the moisture content. The moisture meter BTS-5000 determines the moisture content in sand and aggregates fast and exactly. It forms thus the foundation for a correct dosing of the aggregates.
?如今，混凝土質量對工業生產過程中是至關重要的。為了滿足日益增長的質量要求，它是必不可少的控制和調節水分含量。該水分儀bts-5000確定在沙子和碎石快速、準確的水分含量。因此，它形成了一個正確的劑量的聚集體的基礎。
Improvement of the concrete quality
改善混凝土質量
? The main advantage of a moisture measurement is the substantial improvement of the concrete quality. By measuring continuously during the complete batching procedure, the moisture values are detected and the whole production process is permanently controlled. This ensures an exact sand / water correction.
?一水分測量的主要優點是混凝土質量的大幅度提高。通過連續測量過程中的完整的配料過程中，檢測到的濕度值和整個生產過程中被永久地控制。這確保了一個確切的沙子/水的校正。
? Function
?功能
? The BTS-5000 receives and processes the signals of the sensor and converts them into moisture values. The moisture is measured directly in the flow of bulk material, which ensures the cleaning of the sensor through the flowing material.
?的bts-5000接收并處理傳感器的信號并將其轉換為水分值。在散裝物料的流動直接測量的水分，確保通過流動的材料的傳感器的清洗。
? Application
?應用
? The BTS-5000 measures all types of sand and aggregates with grain sizes up to 8 mm.
?的bts-5000措施各類砂和骨料粒徑可達8毫米。
Modular structure
模塊化結構
? Thanks to the modular structure, it is possible to enlarge the moisture measurement without any problems, as up to 4 sensors can be connected. The BTS-5000 can be integrated into any PLC or control system without additional software.
?得益于模塊化結構，可以增大水分測量沒有任何問題，為多達4個傳感器可以連接。的bts-5000可以集成到任何PLC或控制而無需額外的軟件系統。
? Technical Data
?技術數據
? Operating temperature:
?操作溫度：
? 1 to 50 °C
?1到50°C
? Signal output:
?信號輸出：
? 0-10 V DC, 0(4)-20 mA, RS232, RS485
?0-10伏直流電，0（4）- 20毫安，RS232，RS485
? Dimensions rack:
?尺寸架：
? WHD 160 x 120 x 50 mm
?WHD 160 x 120 x 50毫米
? Dimensions front frame:
?尺寸前框：
? WHD 170 x 130 x 4 mm
?WHD 170 x 130 x 4毫米
? Power supply:
?電源：
? 230 V AC / 50/60 Hz, 115V AC / 60 Hz
?AC 230 V / 50 / 60 Hz、60 Hz 115V交流/

Concrete moisture meter / capacitive / surface-mount / with digital display BTS-5000 混凝土表面水分儀/電容/數字顯示bts-5000安裝/