Flame Treatment Unit / pillar GAS FLAMING C 火焰處理單元/支柱氣體燃燒

Characteristics
特點
Type:
類型：
pillar
支柱
Description
描述
To print on certain surfaces (in particular, plastics such as polypropylene, polyethylene and poly-acetate) may be necessary to subject the pieces, before (pre-treatment) or after printing (post-treatment), to a flaming process. This operation promotes the adhesion of the ink and its polymerization because it eliminates the superficial greasy substances and creates a temporary modification of the material surface, increasing its surface tension.
在某些表面上印刷（特別是聚丙烯，聚乙烯和聚乙酸乙烯酯）可能是必要的主題的作品，前（前處理）或印刷后（后處理），到一個燃燒的過程。此操作可促進油墨的附著力和聚合，因為它消除了表面的油膩物質，并創建一個臨時修改的材料表面，增加其表面張力。
There are several types of flamers: column, for lines, flaming tape. It is possible to install burners for LPG gas of different sizes depending on the surface to be treated (60-100-130-150-200 mm); they are fitted with flame non-return valves and made according to the EC regulations in force.
有幾種類型的產品：柱，線條，火紅的磁帶。它可以安裝于待處理表面大小不同的液化氣燃燒器（60-100-130-150-200毫米）；他們都裝有火焰止回閥，根據歐盟法規生效了。
The automatic control device allows to set the ignition of the flame, the detection of its presence, the gas solenoid valve.
自動控制裝置可以設置火焰的點火，其存在的檢測，氣體電磁閥。
GAS FLAMING C
氣體燃燒
It is a column flamer, convenient because adjustable in height and therefore adaptable to all working conditions. With a pneumatic mode of operation, it can be connected to any pad printing machine produced by Comec Italia. The flame can start either by pedal or through consent of the machine to which it is connected. It is available in the model with 1 or 2 burners.
這是一列噴火器，方便，可調高度，因此適用于所有的工作條件。一個氣動操作方式，它可以連接到任何的移印機的意大利科業產生。火焰可以通過踏板或通過它連接的機器的許可來啟動。它可在模型中有1個或2個燃燒器。

Flame Treatment Unit / pillar GAS FLAMING C 火焰處理單元/支柱氣體燃燒