高分辨率聚焦成像——高損傷閾值（最高可達1*千瓦）
工業激光監測系統ILMS專為分析高功率工業激光的聚焦光斑而設計。該系統結合了再成像/放大光學元件、保偏分束器以及DataRay光束分析儀，可測量微小光束腰（小至數微米），而傳統分析系統在此條件下可能受損。通過放大聚焦光束，該系統能對低至微米級的光斑進行全像素逐點二維測量。
ILMS兼容大多數DataRay光束分析儀，并配備功能全面、高度可定制且以用戶為中心的軟件（無許可費用）。軟件自動計算系統放大倍率，無需后處理或手動修正結果。
核心特點
波長范圍覆蓋190 nm至16 μm
可測光束腰直徑低至數微米
提供高放大倍率選項（50倍及以上）
支持高功率激光（最高千瓦級）
三組可切換濾光片實現靈活精細衰減
分析儀可單獨拆卸使用
可選配校準針孔光圈
集成功率計與光束捕集器（可選）
提供無分束器版本（適用于低功率聚焦光束）
集成功率計選項（詳情咨詢）
典型應用
緊聚焦光束、光纖端面、邊緣耦合器、激光二極管等
高功率激光切割系統
增材制造
質量控制
| Specification | Detail |
|---|---|
| Magnification | ILMS-5-X: 5x ILMS-10-X: 10x ILMS-50-X-: 50x |
| AR Coating Wavelength (nm) | ILMS-X-UV: 250-425 ILMS-X-VIS: 425-675 ILMS-X-532: 532 ILMS-X-NIR: 750-1550 ILMS-X-1064: 1064 |
| Input Optics NA | ILMS-5-X: 0.17 ILMS-10-X: 0.17 ILMS-50-532-: 0.6 ILMS-50-1064: 0.65 |
| System Dimensions (mm) | ILMS-5-X: 70.00 x 133.25 x 176.30 ILMS-10-X: 70.00 x 133.25 x 252.50 ILMS-50-X: 70.00 x 133.25 x 328.70 |
| Typical minimum beam waist diameter (1/e2, um) | ILMS-5-X: 11 ILMS-10-UV: 5.5 ILMS-10-VIS: 5.5 ILMS-10-NIR: 9 ILMS-50-532: 2 ILMS-50-1064: 3 |
| Integrated Beam Profiling Camera | ILMS-X-UV: WinCamD-LCM ILMS-X-VIS: WinCamD-LCM ILMS-X-532: WinCamD-LCM ILMS-X-NIR: WinCamD-LCM ILMS-X-1064: WinCamD-LCM |
| Pixel Count, H x V | WinCamD-LCM: 4.2 MPixel, 2048 x 2048 |
| Optical Format | WinCamD-LCM: 1″ |
| Image Area | WinCamD-LCM: 11.3 x 11.3 mm |
| Pixel Dimension | WinCamD-LCM: 5.5 x 5.5 μm |
| Shutter Type | WinCamD-LCM: Global |
| Max. Frame Rate* | WincamD-LCM: 60 Hz |
| Single Pulse Capture PRR | WinCamD-LCM: USB 2.0 @ 6.3 kHz; USB 3.0 @ 12.6 kHz |
| Signal to RMS Noise | WinCamD-LCM: 2,500:1 (34 dB optical / 68 dB electrical) |
| Electronic Shutter Range | WinCamD-LCM: USB 2.0 @ 12,600:1 (41 dB), USB 3.0 @ 25,000:1 (44 dB) |
| ADC | WinCamD-LCM: 12-bit |
| Measurable Sources | WinCamD-LCM: CW beams, pulsed sources; CW to 12.6 kHz with single pulse isolation |
| Measured Beam Powers | Model dependent, contact [email protected] |
| Manual Beam Attenuation | Includes ND-1, ND-2, and ND-4 filter inserts |
| Displayed Profiles | Line, 2D & 3D plots. Normalized or un-normalized. Linear or Logarithmic, Zoom x10 2D, 3D in 10, 32 or max. colors or grayscale Contoured display at 10 and 32 colors |
| Measured & Displayed Profile Parameters | Raw and smoothed profiles Triangular running average filter up to 10% FWHM |
| Beam Diameter | Diameter at two user set Clip levels Gaussian & ISO 11146 Second Moment beam diameters Equivalent diameter above a user defined Clip level Equivalent Slit and Knife Edge diameters |
| Beam Fits | Gaussian & Top Hat profile fit & % fit Equivalent Slit profile |
| Beam Ellipticity | Major, Minor & Mean diameters. Auto-orientation of axes. |
| Centroid Position | Relative and absolute Intensity Weighted Centroid and Geometric Center Beam Wander Display and Statistics |
| Measurement Accuracy (not limited to pixel size) | 0.1/M μm processing resolution for interpolated diameters (where M is magnification) Absolute accuracy is beam profile dependent – ~1/M μm accuracy is frequently achievable (where M is magnification) Centroid accuracy is also beam dependent (as good as ±1/M μ since it is arithmetically determined from all pixels above the centroid clip level) (where M is magnification). |
| Processing Options | Image & profile Averaging, 1, 5, 10, 20, Continuous. Background Capture and Subtraction. User set rectangular Capture Block for capture User set or Auto ellipse Inclusion region with beam tracking for processing *.ojf files save all WinCamD custom settings for particular test configurations |
| Pass/Fail display | On-screen selectable Pass/Fail colors. Ideal for QA & Production. |
| Log Data and Statistics | Min., Max., Mean, Standard Deviation, to 4096 samples |
| Relative Power Measurement | Rolling histogram based on user’s initial input. Units of mW, μJ, dBm, % or user choice (relative to a reference measurement input) |
| Fluence | Fluence, within user defined area |
| Certification | RoHS, WEEE, CE |
| Multiple Cameras | Up to 4 cameras, parallel capture. 1 to 8 cameras, serial capture. |
| Optical depth from housing/filter to sensor (no window) ±0.2 mm | 4.0/ 8.5 mm (verify before purchasing) |
| Mounting | M6 and M3 mounting points |
| Weight? Camera w/ MagND and filter cover | 5 lbs (2kgs) |
| Minimum Requirements | Windows 10 64-bit |
