DataRay WinCamD光斑分析儀,光束輪廓質量分析儀
DataRay 生產三種系列的光斑攝像機: WinCamD, BladeCam, and TaperCamD cameras. 這些CMOS和VO微波測量的相機覆蓋了從190納米到16毫米不等的不同波長。
| 規格 | 詳述 |
|---|---|
| 波長 | WinCamD-LCM: 355 to 1150 nm WinCamD-LCM-1310: 355 to 1350 nm (includes long pass filter) WinCamD-LCM-TEL: 1480 to 1605 nm WinCamD-LCM-UV: 190 to 1150 nm |
| 像素數? H x V | 4.2 MPixel? 2048 x 2048 |
| 光學格式 | 1″ |
| 成像區域 | 11.3 x 11.3 mm |
| 像素尺寸 | 5.5 x 5.5 μm |
| 最小光斑 (10 pixels) | ~55 μm |
| 快門種類 | Global |
| 最大貞速率* | 60 Hz |
| 單脈沖捕捉PRR | USB 2.0: 6.3 kHz USB 3.0: 12.6 kHz |
| Signal to RMS Noise | 2,500:1 (34 dB optical / 68 dB electrical) |
| 電子快門范圍 | USB 2.0: 12,600:1 (41 dB) USB 3.0: 25,000:1 (44 dB) |
| ADC | 12-bit |
| 可測量的激光源 | CW beams? pulsed sources; CW to 12.6 kHz with single pulse isolation Software configurable Auto-trigger? Synchronous & Variable Delay |
| 可測量的光斑功率 | See Charts |
| 手動光束衰減 | Includes ND-1, ND-2, and ND-4?magnetic ND filters?or?C-mount ND filters |
| 可顯示的文件 | Line? 2D & 3D plots. Normalized or un-normalized. Linear or Logarithmic? Zoom x10 2D? 3D in 10? 32 or max. colors or grayscale Contoured display at 10 and 32 colors |
| Measured & Displayed Profile Parameters | Raw and smoothed profiles Triangular running average filter up to 10% FWHM |
| 光斑直徑 | Diameter at two user set Clip levels Gaussian & ISO 11146 Second Moment beam diameters Equivalent diameter above a user defined Clip level Equivalent Slit and Knife Edge diameters |
| Beam Fits | Gaussian & Top Hat profile fit & % fit Equivalent Slit profile |
| Beam Ellipticity | Major? Minor & Mean diameters. Auto-orientation of axes. |
| 質心位置 | Relative and absolute Intensity Weighted Centroid and Geometric Center Beam Wander Display and Statistics |
| 測量精度 (not limited to pixel size) | 0.1 μm processing resolution for interpolated diameters. Absolute accuracy is beam profile dependent – ~1 μm accuracy is frequently achievable. Centroid accuracy is also beam dependent (as good as ±1 μ since it is arithmetically determined from all pixels above the centroid clip level). |
| 選項 | Image & profile Averaging? 1? 5? 10? 20? Continuous. Background Capture and Subtraction. User set rectangular Capture Block for capture User set or Auto ellipse Inclusion region with beam tracking for processing *.ojf files save all WinCamD custom settings for particular test configurations |
1″ CMOS Beam Profiler System, 190 to 1610* nm
Port-powered USB 3.0
特征
新型 MagND™ 可堆疊磁性 ND 濾光片 – 將備用濾光片存放在相機背面
355 至 1150 nm，標準 CMOS 探測器
高達 60+ FPS
4.2M 像素，2048 x 2048 像素，11.3 x 11.3 毫米有效區域
5.5微米像素
HyperCal™ – 動態噪聲和基線校正軟件
端口供電的USB 3.0； 靈活的螺釘鎖定 3 m 電纜； 沒有電源磚
12位ADC，板載微處理器
無窗傳感器標準，無邊緣現象
25,000:1 電子自動快門，79 μs 至 2 s
2,500:1 信噪比
全局快門、光學/TTL 觸發器
隔離脈沖觸發和并行捕獲
現場可更換圖像傳感器
M2 選項 – 光束傳播分析、發散、聚焦
DataRay WinCamD Beam Profiler應用領域
連續波和脈沖激光輪廓分析
激光器和基于激光的系統的現場服務
光學組裝和儀器對準
光束漂移和記錄
使用可用的 M2DU 平臺進行 M2 測量
* 取決于型號
請注意：
該產品需要 64 位 Windows 7、8/8.1 或 10
