Spur pinion gear reducer / parallel shaft / for levelling machines GW, GDW series 圓柱齒輪減速器/平行軸/整平機GW，高低溫箱系列
Characteristics
特點
Type:
類型：
spur pinion
小齒輪
Shaft orientation:
軸方向：
parallel shaft
平行軸
Product applications:
產品應用：
for levelling machines
矯平機
Power:
權力：
Min.: 20 kW (26.82 hp)
20千瓦（26.82馬力）
Max.: 500 kW (670.51 hp)
最大：500千瓦（670.51馬力）
Description
描述
The GDW series is a line of gear systems for leveling machines, manufactured by Eisenbeiss. This system is specifically designed for straightened strips and pre-straighteners. The system’s first output shafts are subjected to heavy loads that are gradually passed on to every shafts.
高低溫箱系列是矯平機的齒輪系統，由Eisenbeiss。本系統是專門為直條和預矯直機。該系統的第一個輸出軸受到沉重的負載，逐漸傳遞到每一個軸。
The gear systems are developed for individual requirements where the designs totally depend on the exact requirements, in respect to the number of output shafts, axle spacing, torques, and the load to be expected in the production.
齒輪系統的設計完全依賴于精確的要求，在生產軸，軸間距，扭矩，以及在生產中預期的數量的具體要求。
The torque is distributed to up to 17 shafts, while the reduction gear stages are either joined in the same casing as the distribution system, or fitted as individual shaft-mounted units. The system’s motor rating ranges from 20kW to 500kW, which uses combined immersion and force-feed lubrication.
的扭矩分配到17個軸，而減少齒輪階段是加入在同一個殼體的分布系統，或作為單獨的軸安裝單位。系統的電機功率范圍從20KW到500KW，采用組合浸泡和強制潤滑。
Spur pinion gear reducer / parallel shaft / for levelling machines GW, GDW series 圓柱齒輪減速器/平行軸/整平機GW，高低溫箱系列