Elliott’s GT Series Grooving Tools, also known as Serrating Tools, can be used manually to clean up existing grooves or can be used in milling or drilling equipment for OEM tube sheet thicknesses of 3/8” (9.5mm) through 2-1/8” (54.0mm).

• Tube Size: 0.375″ to 3.000″ (9.5 – 76.2mm) OD

  One-Revolution Tube Cutter

  Elliott’s One-Revolution Series tube cutters are unlike any other one-revolution cutter. Using more advanced engineering principles the cutter and blade have been designed to last longer, withstand more wear, and require less force to cut the tube.

  • Tube Size: 0.375″ to 2.500″ (9.53 – 63.5mm) OD

  • Reach: 6″ & 12″ (152.4 & 304.8mm)

  • Type: Tube Cutter

  • Great For Puncturing Or Cutting

    Electric Torque Controller

    Elliott’s ELC110220 is the first torque control with an Embedded Logic Controller that senses and is compatible with both 110V or 220V automatic, and manual reverse rolling motors.

    • Tube Size: 0.250″ to 3.000″ (6.4 – 76.2mm) OD

    • Voltage: 110V to 240V

    • Languages: English or Spanish

    • Compatibility: Elliott’s 99 Series Electric Rolling Motors (other electric motors with optional adapters)

    • Auto-Reverse

    900 Series Flaring Boiler Tube Expanders

    Elliott’s 900 Series Flaring Boiler Expanders are self-feeding, specifically made for use in superheaters in watertube boilers or evaporator tubes. In only one operation, these expanders roll tubes parallel and flare projecting tube ends at 15 degrees from the tool center line.

    • Tube Size: 0.620” to 1.500” (15.4 – 38.1mm) OD

    • Roll Type: Flaring

    • Application: Superheaters, watertube boilers, and evaporator tubes.

      4480 Series Single Roll Beading Tube Expander

      Elliott’s 4480 Series Single Roll Beading Expanders expand the tube into the tube sheet while forming a bead at the end of the tube required in Firetube boiler applications.

      • Tube Size: 2.000” to 3.000” (50.8 – 76.2mm) OD

      • Roll Type: Roll Beading

      • Application: Firetube Boiler

        Super Collet Tube Puller

        Elliott’s collet style tube puller is designed to quickly pull tube stubs from tube sheets without damaging the tube sheet hole. Offering the gripping power of a spear with the speed and convenience of a collet.

        • Tube Size: 0.50″ to 2.50″ (12.7 – 63.5mm)

        • Type: Tube Puller

        • Application: Condensers, chillers, heat exchangers, boiler air heaters, and paper mill evaporators

        • Pulling Capacity: Up to 25 Tons

        • Pulling Stroke: 6.00″ (152.4mm)

          1500 Series

          Flaring Boiler Tube Expanders

          Elliott’s 1500 Series Flaring Boiler Expanders are self-feeding, specifically made for use in Firetube and watertube boilers. In only one operation, these expanders roll tubes parallel and flare projecting tube ends at 20 degrees from the tool center line.

          • Tube Size: 1.750” to 4.000” (44.5 – 101.6mm) OD

          • Roll Type: Flaring

          • Application: Firetube Boiler and Watertube Boiler

            3400 Series

            Flaring Boiler Tube Expanders

            Elliott’s 3400 Series Flaring Boiler Expanders are the recommended tube expanders for expanding and flaring tubes in Firetube and watertube boilers. The prong style collar allows for uniform flare lengths as well as torque controlled tube rolling to obtain uniform expanded joints.

            • Tube Size: 1.500” to 4.000” (38.1 – 101.6mm) OD

            • Roll Type: Flaring

            • Application: Firetube and Watertube Boiler

              3300 Series

              Straight Boiler Tube Expanders

              Elliott’s 3300 Series Straight Boiler Expanders are the preferred tube expanders for expanding tubes in Firetube boilers or in self-contained steam boiler units. They are recommended for any requirement for parallel expansion of tubes in tube sheets.

              • Tube Size: 1.500” to 4.000” (38.1 – 101.6mm) OD

              • Roll Type: Straight

              • Application: Firetube Boiler and Steam Boiler

                DRE Series

                Deep Roll Boiler Tube Expanders

                Elliott’s DRE Series Deep Roll Boiler Expanders are used for deep and hard rolling of steam and mud drums found in high-pressure boilers.

                • Tube Size: 1.750” to 4.000” (44.5 – 101.6mm) OD

                • Roll Type: Straight

                • Application: Steam & Mud Drums and Watertube Boiler

                  40 Series

                  Straight Roll Boiler Tube Expanders

                  Elliott’s 40 Series Straight Boiler Expanders are recommended for re-rolling leaky tube joints in Firetube boilers. Self-feeding, these expanders should primarily be used by hand.

                  • Roll Type: Straight

                  • Application: Firetube Boiler

                  Tube Size: 2.000” to 3.000” (50.8 – 76.2mm) OD