The H10P?and U10L series are rated for 10,000 psig / 689 bar(g) service.

Equilibar’s Research Series back pressure regulators offer precision performance for high pressure applications up to 10,000 psig / 689 bar(g). These regulators provide stable inlet pressure across widely varying flow rates, for liquid, gas, and mixed phase fluids. In addition, Equilibar offers the EPR-3000, a high pressure electronic controller that provides automation solutions for applications involving pressures up to 3000 psig / 206 bar(g).?equibar 的研究系列背壓調節器可為高達 10, 000 psig/689 bar (g) 的高壓應用提供精確的性能。這些調節器為液體、氣體和混合相流體提供了各種不同流量的穩定入口壓力。此外, equilibar 還提供 epr-3000, 這是一種高壓電子控制器, 可為壓力高達 3000 psig/206 bar (g) 的應用提供自動化解決方案。

For Research Series regulators, diaphragms of Stainless Steel 316, Polyimide, PEEK, and Hastelloy are suitable for the high pressure range.?對于研究系列調節器, 不銹鋼316、聚酰亞胺、peek 和 hastelloy 的隔膜適用于高壓范圍。

The back pressure regulator shown at above, the H10P, is rated for 10,000 psig / 689 bar(g). Like all Equilibar back pressure regulators, it requires a 1:1 fluid set-point on the top reference port. This high pressure pilot pressure is typically supplied from high pressure inert gas bottles, such as nitrogen. Customer typically use a manual pressure reducing regulator or a high pressure electronic pressure regulator to control this set-point pressure.?上面顯示的背壓調節器 h10p 的額定值為 10, 000 psig/689 bar (g)。與所有 equilibar 背壓調節器一樣, 它需要在頂部參考端口上設置一個1:1 流體設置點。這種高壓中試壓力通常由高壓惰性氣體瓶 (如氮?dú)? 提供。客戶通常使用手動降壓調節器或高壓電子壓力調節器來控制這種設定點壓力