的HYDROMETTE CM-P PRO MOISTURE ANALYZER水分分析儀

2015年5月29日

The Hydromat CM-P Pro is a device for determining the dampness of hardened building materials and various other materials using the calcium carbide method. The use of this measuring technique is recommended by various specialist associations for a range of measurement tasks and has thus been well known for years in practice alongside electrical measurement.

The Hydromat CM-P Pro is easy to use. All measurements can be made directly on the object using the tools contained in the carrying case and enable rapid information to be obtained concerning the current state of dampness.

The case set is more extensively equipped however. Amongst other things it contains the Hydromette Compact B moisture indicator to reduce the number of individual CM measurements necessary, to scan larger surfaces quickly and efficiently and to achieve a significantly higher level of test reliability. The preliminary test unit works non-destructively using a high frequency field.

By means of the useful pestle, the material under test can be crushed and quickly prepared directly in the pressure flask while preserving the dampness.

The decision as to whether a floor or wall surface is ready for covering, for example, can be made immediately.

So the CM-P Pro is particularly suited for parquet reclining or floor tiling contractors, construction companies, architects, or surveyors.

該HYDROMAT CM-P Pro是一個裝置，用于確定使用電石方法硬化建材和各種其它材料的除濕。使用這種測量技術的建議通過各種專家協會為一系列的測量任務，因此被公知多年實踐中沿著電氣測量。

所述HYDROMAT CM-P Pro是易于使用。所有的測量可以直接使用包含在攜帶用箱的工具在對象上進行，并能夠快速信息要關于化濕的當前狀態獲得。

此案集更廣泛然而齊全。除其他事項外它包含Hydromette緊湊乙濕度指示器，以減少所需的單個的CM測量的次數，以掃描較大的表面迅速和有效地和以達到測試可靠性顯著更高的水平。初步試驗裝置的工作原理非破壞性利用高頻場。

由有用杵的裝置，被測材料可以被粉碎，并迅速直接制備在壓力瓶中，同時保持化濕。

作為到地板或墻壁表面是否準備好覆蓋，例如，可以立即作出的決定。

因此，CM-P Pro是特別適用于實木復合地板傾斜或瓷磚地板承包商，建筑公司，建筑師或測量師。

 

Measuring Range

Structural Moisture:
0.30 to 7.50 CM-% using gauge readout
0.14 to 22.90 CM-% using conversion table

 

Features

  • Particularly compact pressure cylinder
  • Specially shaped cylinder bottom
  • Variable sealing system
  • Small sample quantity (e.g. 20/50 g)
  • Case size: approx. 500 [L] x 420 [W] x 125 mm [H]
  • Weight of case: complete approx. 8.960 kg

The complete case set includes:

  • Pressure cylinder with lid and PREMIUM gauge
  • Manual pestle
  • 20 calcium carbide vials
  • 5 test water vials
  • Protective gloves
  • Protective glasses
  • Debris tray
  • Digital timer
  • 20 PE bags
  • Flat chisel
  • 1000 g mallet
  • Paint brush
  • Duster
  • Bottle brush
  • Elektronische scale
  • Weighing tray
  • Ball set
  • Sample spade
  • Replacement gaskets
  • Operating insructions
  • Carrying case P and
  • Hydromette Compact B structural moisture pre-tester (order code 2030)