Our Plasma Cleaners require a vacuum pump with a minimum pump speed of 1.4 m3/hr (0.83 ft3/min) and an ultimate total pressure of 200 mTorr (0.27 mbar) or less

Rotary vane pumps with hydrocarbon pump oil (included with pump)

Suitable for pumping nonreactive or inert gases (e.g. Air, N2 or Ar)

These pumps are not intended for pumping oxygen; see our Oxygen Service Pumps

For corrosive or reactive gases, consult with us directly

PDC-VP (115V); PDC-VP-2 (230V)

Premium Quality Model (higher reliability)

Pumping Speed (50/60 Hz): 3.2/3.6 m3/hr 

Ultimate Total Pressure (gas ballast closed): 1.5 mTorr 

Ultimate Total Pressure (gas ballast open): 23 mTorr 

Motor Power (50/60 Hz): 250/300 W 

Weight: 34 lbs 

Size: 9" H x 15" W x 5" D

Integrated inlet check valve

Pump inlet: includes hose, hose clamps, and hose adaptor to connect plasma cleaner to pump inlet

Pump outlet: includes oil mist filter to filter oil vapor from pump exhaust

PDC-VP-OIL (1 quart)

Replacement oil for Premium Quality Vacuum Pumps PDC-VP, PDC-VP-2

PDC-VPE (115V); PDC-VPE-2 (230V)

Basic Model (lower cost) 

Pumping Speed (50/60 Hz): 5.1 m3/hr 

Ultimate Total Pressure (gas ballast closed): 7.5 mTorr 

Ultimate Total Pressure (gas ballast open): 150 mTorr 

Motor Power (50/60 Hz): 373 W 

Weight: 27 lbs 

Size: 9.75" H x 14" W x 5.5" D

Pump inlet: includes check valve, hose, hose clamps, and hose adaptor to connect plasma cleaner to pump inlet

Pump outlet: includes oil mist filter to filter oil vapor from pump exhaust

PDC-VPE-OIL (1 quart)

Replacement oil for Basic Vacuum Pumps PDC-VPE, PDC-VPE-2