Electrical duct heater 4 – 20 mA 電氣管道加熱器20 – 4毫安

Characteristics
特點
Power source:
電源：
electrical
電
Description
描述
A job specification can be prepared by using the following information. Simply darken the applicable circles. Material which is part of the basic specification has already been darkened. Additional copies of this specification guide are available from your local Heatrex representative.
可以使用以下信息來編寫工作規范。簡單地將適用的界。材料是基本規格的一部分，已經被黑暗了。本規范指南額外的副本可從您當?shù)氐膆eatrex代表。
Duct heaters shall be Heatrex:
管道加熱器應heatrex：
Type HUA Custom Slip-in Heater
在加熱爐中鍵入“華定制”
Type HUP Custom Flanged Heater
該自定義類型法蘭加熱器
Approvals – Heaters and panelboards (if required) shall meet the requirements of the National Electrical Code and shall be listed by Underwriters Laboratories for zero clearance to combustible surfaces and for use with heat pumps and air conditioning equipment.
批準-加熱器和配電盤（如果需要）應符合國家電氣規范的要求，應當由保險商實驗室列為零間隙可燃表面和用于熱泵和空調設備。
Heating elements shall be open coil, 80 nickel, 20 chromium, Grade A resistance wire. Type C alloys containing iron or other alloys are not acceptable. Coils shall be machine crimped into stainless steel terminals extending at least 1″ into the airstream and all terminal hardware shall be stainless steel. Coils shall be supported by ceramic bushings staked into supporting brackets.
加熱元件應為開路線圈，80鎳，20鉻，級電阻絲。含鐵或其他合金的含鐵合金是不可接受的。線圈應機卷曲成不銹鋼終端延伸至少1”進入氣流和所有終端硬件將不銹鋼。線圈由陶瓷套管押到支架支撐。
Heater frames and terminal boxes shall be corrosion resistant steel. Unless otherwise indicated, the terminal box shall be NEMA 1 construction and shall be provided with a hinged, latching cover and multiple concentric knockouts for field wiring.
加熱器和接線盒應為耐腐蝕鋼。除非另有說明，接線盒應符合NEMA 1建筑應設置鉸接，保持現場接線蓋和多個同心擊倒。

Electrical duct heater 4 – 20 mA 電氣管道加熱器20 – 4毫安