PROBE FT25 – WITH INTEGRATED TEMPERATURE SENSOR PT100 – WITH CONNECTION CABLE
Cylindrical vane wheel sensor / insertion probe with integrated temperature sensor Pt100 for combined measurement flow/temperature and probe diameter 25 mm.
Probe materials: aluminium, stainless steel or titanium.
Working temperature range up to +260 °C.
Suitable for fixed measuring of actual flow velocity v [m/s] and flow rate V/t [m³/h, l/min] in clean gases and liquids, briefly also in particle-laden mediums. They are extendable and therefore practical for applications in smoke stacks, etc.
Signal evaluation with handheld unit flowtherm NT, transducer UFA and system units.
MEASURING RANGE
0.4 … 120 m/s in air/gases
0.04 … 10 m/s in water/liquids
PRESSURE RESISTANCE
up to 6 bar / 600 kPa overpressure
MEDIA TEMPERATURE
-40 … +260 °C
MEDIA
gases / liquids
IP PROTECTION TYPE
IP65 (cable side)
TYPE OF PROTECTION
ATEX category 2G (zone 1), (optional)
SENSOR OUTPUT
v/FA, t/Pt100
|
|
||||
|
Gaseous mediums |
air / gases |
air / gases |
air / gases |
air / gases |
|
Liquid mediums |
liquids with viscosity < 200 cSt |
– |
– |
– |
|
Principal areas of application |
measuring in clean gases and liquids, control measuring in gases and liquids |
measuring in particle and condensate laden gases |
air mass flow measurement, measurement of compressed air |
air mass flow measurement, measurement of compressed air |
|
Measured variables |
flow velocity / flow rate |
flow velocity / flow rate |
mass flow / standard flow rate |
mass flow / standard flow rate |
|
Measuring ranges (in stages) |
0.3 …120 m/s |
0.5 … 80 m/s |
0.2 … 200 Nm/s |
0.08 … 60 Nm/s |
|
Working pressure (overpressure) |
1 MPa /10 bar |
300 kPa / 3 bar |
2.5 MPa /25 bar |
1 MPa /10 bar |
|
Working temperature range |
-40 … +550 °C |
-25 … +240 °C |
-10 … +140 °C |
-10 … +240 °C |
|
Temperature measuring range (with integrated Pt100) |
-40 … +300 °C |
-10 … +250 °C |
-10 … +140 °C |
-10 … +240 °C |
|
Ex-protection zone 0 / category 1 (gases) |
|
|
|
|
|
Ex-protection zone 1 / category 2 (gases) |
|
|
|
|
|
Ex-protection zone 20 / category 1D (dust) |
|
|
|
|
|
Ex-protection zone 21 / category 2D (dust) |
|
|
|
|
|
Materials in contact with mediums |
aluminium, stainless steel, titanium … |
stainless steel, titanium, Hastelloy C4/C22/B2, tantalum … |
stainless steel 1.4571, 1.4305, 1.4404, epoxy, polyimide, glass |
stainless steel … |
|
Smallest necessary insertion opening |
15 mm |
40 mm |
10 mm |
20 mm |
|
Smallest measuring tube inside diameter |
40 mm |
80 mm |
25 mm |
80 mm |
|
Sensor with directional sensing |
FAR |
VAR |
– |
– |
|
Sensor with integrated temperature sensor |
FT |
VAT |
standard |
standard |
All Model:
Vane Wheel FA
ZS25
ZG4
250GE
350GE
450GE
550GE
650GE
ZG1
ZG2
ZG1/ZG2
ZG3
ZS25/27
ZS25
ZS27
ZG5
ZG4
ZS30
ZS16
ZSR25
FT25
TS/TSR
FA·Di 9.7GE
µP-ASD-R
µP-ASD
Vortex VA
VA40
ZG7
ZG8
VA42
FLOWTHERM
Thermal TA
Ultrasonic UA
Vortex VA
Thermal TA
Ultrasonic UA
