One-off Components
Alongside the manufacture of our standard optical components we also produce one-off, specialist components to our client’s specification. These include scintillation detectors to be used in security scanners and X-Ray monochromators for the use in medical technology, to name but a few.
一次性組件
除了制造我們的標準光學組件外，我們還根據客戶的要求生產一次性的專業組件。其中包括用于安全掃描儀的閃爍探測器和用于醫療技術的X射線單色儀等。
| Scintillator crystals | Some of our crystals are used as scintillation detectors for ionising radiation, for instance, we offer detector arrays for scanners made of CsJ:Ti which are used in airport baggage control and other applications. | |||
|---|---|---|---|---|
| BaF2 | CaF2:Eu | CsJ:Tl | NaJ:Tl | |
| X-Ray monochromators | X-Ray monochromators are produced to your specification, frequently using Lithium fluoride but also many other crystal materials. | ||
|---|---|---|---|
| LiF | NaCl | KBr | |
| Ion-selective Elektrodes | LaF3:Eu | |||
|---|---|---|---|---|
| Cherenkov Counter | NaF | |||
|---|---|---|---|---|
| Deposition Substrates | BaF2
| NaCl | KBr | |
|---|---|---|---|---|
| UHV-Viewports | MgF2 | CaF2 |
|---|
We can also provide cleaved crystals for epitaxy experiments.
我們還可以為外延實驗提供切割晶體。
| Cleaved crystals for epitaxy experiments | All cleavable materials produced in-house can be used for epitaxy experiments as atomically flat surfaces. The following materials are particularly suitable:? | ||
|---|---|---|---|
| NaCl | KCl | KBr | |
Measuring Cells and replacement parts for the analysis of liquids and solids
We offer a large assortment of ATR-crystals for use in the field of spectroscopy.
We also offer both dismantleable and sealed cuvettes. For decades, cuvettes have been used for the optical analysis of liquids, oils and pastes. Cuvettes consist of a metal frame and two crystal windows (sometimes Fused Silica windows). The substance to be measured is held between the two windows. To prevent any leakage all lead seals are covered with an amalgamating solution. Where the substance to be measured is viscous, seals made of Teflon are sufficient. The thickness of the substance to be measured is adjusted using a spacer.
We can construct the cuvettes in house to your specification or supply the parts, allowing you to assemble the cuvettes using the following?Instructions.
用于液體和固體分析的測量單元和替換部件
我們提供用于光譜學領域的大量ATR晶體。
我們還提供可拆卸和密封的反應杯。幾十年來，試管一直被用于液體、油和糊劑的光學分析。反應杯由一個金屬框架和兩個水晶窗（有時是熔融石英窗）組成。待測物質夾在兩個窗口之間。為了防止任何泄漏，所有鉛密封件都用汞合金溶液覆蓋。如果要測量的物質是粘性的，聚四氟乙烯制成的密封件就足夠了。使用墊片調整待測物質的厚度。
我們可以根據您的規格建造反應杯或提供零件，允許您按照以下說明組裝反應杯。
| Cuvettes | We primarily use Teflon seals for dismantleable cuvettes, as these are easier to handle and simple to disassemble. Sealed cuvettes with a pre-determined depth are sealed using lead seals, which are then covered in an amalgamating solution. The seals are then checked and the exact depth of the cuvette measured with the spectrometer. We have spacers in the following standard sizes: |
|---|---|
| Spacers? (other dimensions on request)? | 22mm x 38,5mm |
| Teflon:?100, 170, 200, 500, 1000μm Lead:?50, 75, 100, 150,?175, 200, 500, 6000 μm |
