Orbital welding head / automatic / open max. ? 168.3 mm | Quickclamp series 軌道焊接頭/自動/開最大?168.3毫米| quickclamp系列

Characteristics
特點
Technique:
技術：
orbital
軌道
Operation:
運行：
automatic
自動
Other characteristics:
其他特點：
open
打開
Description
描述
The weld heads manufactured by Quickclamp are suitable for reproducing all the precise motions of a skilled manual GTAW welder. Note that both models are designed specifically for multipass pipe welding applications and can produce welds consistently, meeting the most stringent standards in terms of code quality. The item is used with a Pipemaster Power Source, which makes the welds improve productivity by increasing the duty cycle, reducing the repair rates and producing welds of consistent quality.
焊接頭制造的quickclamp適合再生所有熟練的手工鎢極氬弧焊焊機精確的運動。需要注意的是模型是專為多通道管道焊接應用而設計的，可以產生焊縫一致，滿足最嚴格的標準，按照代碼質量。該項目是用一個pipemaster電源，使焊縫增加占空比的提高生產率，降低維修率和生產質量穩定的焊接。
The weld head is simply slipped over the pipe and clamped with a toggle lever. The continuously adjustable clamp can eliminate the need to interchange components. The wide V-block clamp self centers ensures that the head is squarely mounted relative to the joint. Note that the weld head mounts on one side of the joint entirely, which allows the use for pipe-to-fitting welds.
該焊接頭是簡單地在管上滑，并與一個切換桿夾緊。連續可調鉗可以消除需要交換組件。寬楔形夾具自我中心確保頭部相對于關節直接安裝。請注意，焊接頭完全連接在一個完全的聯合，這允許使用管道接頭焊接。

Orbital welding head / automatic / open max. ? 168.3 mm | Quickclamp series 軌道焊接頭/自動/開最大?168.3毫米| quickclamp系列