Magnetic Shield MuMETAL金屬退火箔、箔片、屏蔽箔片
描述
MuMETAL箔片經過完全退火處理,主要用于需要最高衰減、最高初始磁導率(Mu)和最高屏蔽效率的低強度場。MuMETAL箔片的厚度從0.002英寸/0.051毫米到0.012英寸/0.305毫米不等。
我們最受歡迎的厚度為0.002英寸/0.051毫米、0.008英寸/0.203毫米和0.012英寸/0.305毫米。
所有壓力表均可在單面使用可選的粘合背襯(帶剝離涂層襯墊的壓敏膠帶)。粘合劑的工作溫度范圍為32°F至140°F(0°C至60°C)。
免責聲明(0.002英寸/0.051毫米厚x 8.0英寸/203.2毫米寬):由于材料的柔軟和薄,表面褶皺和/或皺紋是不可避免的。由于高磁導率所需的高溫退火處理,這種材料不是平的,并且在寬度方向上有彎曲。如果您有任何問題或疑慮,請咨詢我們的技術團隊。
箔片通常可被切割成最小寬度為1/4英寸(6.35毫米),有無背膠均可。箔片寬度公差為0.010英寸/0.25毫米,或0.015英寸/0.38毫米,帶粘合襯背。
MuMETAL箔是完美的退火,最大限度地衰減和可接受的表面外觀。除非進行嚴格的成形或氦弧焊接,否則不需要再退火。
符合ASTM A753合金4和MIL-N-14411C Comp 1。
縱切、剪切或切割服務:根據您的要求,可以將原料箔切開、剪切或切割。
對于4.00英寸和15.00英寸的紙張寬度,請參見co genic AA完美退火箔.
PRODUCT SPECIFICATIONS
Item Number | Type / Finish | Thickness | Width |
MU002-8 | Standard – Uncoated | 0.002 in 0.051 mm | 8.00 in 203.2 mm |
MUT002-8 | With Adhesive (PST on 1-side) | 0.002 in 0.051 mm | 8.00 in 203.2 mm |
MU004-8 | Standard – Uncoated | 0.004 in 0.102 mm | 8.00 in 203.2 mm |
MUT004-8 | With Adhesive (PST on 1-side) | 0.004 in 0.102 mm | 8.00 in 203.2 mm |
MU004-12 | Standard – Uncoated | 0.004 in 0.102 mm | 12.00 in 304.8 mm |
MUT004-12 | With Adhesive (PST on 1-side) | 0.004 in 0.102 mm | 12.00 in 304.8 mm |
MU006-8 | Standard – Uncoated | 0.006 in 0.152 mm | 8.00 in 203.2 mm |
MUT006-8 | With Adhesive (PST on 1-side) | 0.006 in 0.152 mm | 8.00 in 203.2 mm |
MU006-12 | Standard – Uncoated | 0.006 in 0.152 mm | 12.00 in 304.8 mm |
MUT006-12 | With Adhesive (PST on 1-side) | 0.006 in 0.152 mm | 12.00 in 304.8 mm |
MU008-8 | Standard – Uncoated | 0.008 in 0.203 mm | 8.00 in 203.2 mm |
MUT008-8 | With Adhesive (PST on 1-side) | 0.008 in 0.203 mm | 8.00 in 203.2 mm |
MU008-12 | Standard – Uncoated | 0.008 in 0.203 mm | 12.00 in 304.8 mm |
MUT008-12 | With Adhesive (PST on 1-side) | 0.008 in 0.203 mm | 12.00 in 304.8 mm |
MU010-8 | Standard – Uncoated | 0.010 in 0.254 mm | 8.00 in 203.2 mm |
MUT010-8 | With Adhesive (PST on 1-side) | 0.010 in 0.254 mm | 8.00 in 203.2 mm |
MU010-12 | Standard – Uncoated | 0.010 in 0.254 mm | 12.00 in 304.8 mm |
MUT010-12 | With Adhesive (PST on 1-side) | 0.010 in 0.254 mm | 12.00 in 304.8 mm |
MU012-8 | Standard – Uncoated | 0.012 in 0.305 mm | 8.00 in 203.2 mm |
MUT012-8 | With Adhesive (PST on 1-side) | 0.012 in 0.305 mm | 8.00 in 203.2 mm |
MU012-12 | Standard – Uncoated | 0.012 in 0.305 mm | 12.00 in 304.8 mm |
MUT012-12 | With Adhesive (PST on 1-side) | 0.012 in 0.305 mm | 12.00 in 304.8 mm |