先進的電動激光功率衰減器 LPA-U 是一款獨特的設備,專為非偏振激光功率控制而設計,集成了控制器和絕對位置編碼器。LPA-U 可在紫外、可見光和近紅外光譜范圍(343 納米至 2000 納米以及 10.6 微米)內生產。該設備采用獨特的機械堅固設計,確保了高重復性。
LPA-U 的所有光學組件均為高激光損傷閾值而制造,即使在工業應用中與高功率激光器配合使用,也能提供穩定可靠的性能。激光功率衰減器單元產生的二次激光束被引導至內部光束收集器。LPA-U 設備采用水冷方式,以避免設備外殼出現任何熱效應或應力。
特點與優勢
?專為非偏振激光束設計
?平均激光功率高達 200W
?光束偏移補償
?集成控制器
?絕對位置編碼器 – 無需歸零
?高精度 ±0.005 度
?堅固的水冷設計
?通光孔徑 – ?12 毫米
?快速調節 – 小于 0.5 秒(最小到最大)
?高損傷閾值:高達 10J/cm2(10 ns @ 1064 nm)
應用示例
?精密激光微加工
?激光功率穩定
?研究
技術參數:
TICAL | Clear input aperture | ?12 mm |
Clear output aperture | ?12 mm | |
Optical configuration | Angular filter + AR/AR coated Fused silica window | |
Power attenuation range | 2 – 95% | |
LIDT coating | >10 [J/cm2] (10 ns @ 1064 nm) | |
Close to open time | <0,5 sec | |
Accuracy | ±0,005 deg (± 18 arcsec, 0,087 mrad, less than ±0,01%) | |
Resolution | 175,543 μsteps in full rotation (0,002 deg, 7,2 arcsec, 0,035 mrad) | |
Absolute position encoder | YES | |
Available coatings | 1064 nm, 1070 nm, custom | |
Bandwidth | 5-10 nm | |
MECHANICAL | LPA-U mechanical dimensions | 85 x 93,5 x 135 mm |
Controller | Integrated | |
ELECTRONIC | Communication | Trough ASCII commands (described in manual) |
Software interface | LPA software | |
Input voltage | DC 12 V | |
Control interface | USB, RS232 | |
Transmission speed | Up to 115,200 bits/s (RS-232); full speed (USB 2.0) | |
CONDITIONS | Operating temperature, Celsius | +10 to +40 |
Mounting holes | M6 on both sides, M4 on the bottom side | |
Housing material | Anodized aluminum |