RPV-2 Polymer Viscometer PSL-Rheotek

• Intrinsic Viscosity 特性黏數,特性黏度,本征黏度,固有黏度
  
• K-Value K值,聚合度
  
• Limiting Viscosity 特性粘度,極限粘度
  
• Viscosity Number 黏數即比濃黏度,粘度值,比濃粘度
  
• Inherent Viscosity 固有粘度,比濃對數黏度，特性粘度
  
• Relative Viscosity
  

PSL Rheotek RPV-1紙漿和纖維素粘度計系統適用于測量各種紙漿和纖維素產品，包括漂白木材(紙漿)、漂白化學紙漿、蒸煮樣品、棉絮、再生纖維素、老化的電子紙和制藥膨脹材料。RPV-1漿&纖維素粘度計系統配置了獨特的氮氣吹掃系統，以確保樣品在制備和粘度測試過程中不受氧化。RPV-1漿粘度計設計與iSP-2漿纖維素制樣系統相結合。其他選擇包括紙漿攪拌塊和RSS Rheotek智能采樣器。
PSL Rheotek RPV-1紙漿和纖維素粘度計系統自動測量紙漿、紙張或纖維素溶解在銅乙二胺(也稱為塞-塞或Cuene)溶液的粘度。將RPV-1紙漿和纖維素粘度計自動實現標準方法中設定的手動步驟，最小化結果的可變性。系統可以配置1到4個測量位置。其他選擇包括樣品制備、樣品攪拌和自動采樣器。流動時間是用ISO 17025校準證書自動測量的。清洗是用溶劑和安全的真空系統進行的。綜合RPV-1軟件程序記錄所有測量數據，并計算了廣泛的結果，包括相對粘度、固有粘度(限制粘度值)、聚合度(DP)、K值、運動粘度(mm2/ s)和動態粘度(mPa.s)。
紙漿和纖維素的測試方法:
SCAN-CM 15:99銅乙二胺溶液粘度
ISO 5351測定銅乙二胺(CED)溶液中極限粘度數
纖維素固有粘度的標準試驗方法
TAPPI t230漿粘度(毛細管粘度計法)
PACTAC . 24p紙漿銅乙二胺粘度
RPV-1(2)紙漿
PSL Rheotek聚合物粘度計-兩個位置完整的粘度計浴，冷水機，控制模塊，氮氣吹洗系統，兩個測量頭，兩個加油站，PC控制系統和PIAB真空系統。

The PSL-Rheotek RPV-2 Polymer Viscometer is suitable for measuring the dilute solution viscosity of a wide range of polymers. Applications include PA, PET, PVC, PLA, PBT, PC, PE, PP, Cellulose Acetate, Inks, Biopolymers, Pulp and cellulose.

RPV-2? is designed for full integration with sample preparation and sample dissolution modules from PSL-Rheotek. Using these integrated options ensures full integrity of data from end to end in the measurement process.

?Polymer Viscosity

The PSL Rheotek RPV-2 polymer viscometer offers an all-inclusive package of technology for solution viscosity test work. Accurate control of the very low concentations employed in iv test work ensure high quality of test results. Automating the viscosity measurement work provides timely information for product specification and process control. K-value, viscosity number, relative viscosity results also available as per relevant test method.

With automation of flow time determination, results calculation, sample removal, sample path cleaning and sample path drying, the RPV-2 will save a lot of time in the polymer plant laboratory.

Full Method Compliance

Software configurations for all the most common test methods of solution viscosity are availabe as shelf products. So far, the following methods are covered: ASTM D4603, ISO 1628, part 1-5, ASTM D2857, ASTM D789, ISO 307. New methods are added on a continuous basis. An RPV-2 coded with correct method parameters and equations for calculations of results is a guarantee of full method compliance in the day to day testing work. The capillary tubes installed in teh unit are standard ASTM Ubbelohde.

Automated functions include:

• Sample push up
  
• Flow time determination
  
• Results calcuation
  
• Self-check of results quality
  
• Sample removal
  
• Sample path cleaning
  
• Sample path drying