The Luma 40 comes on a simple base for mounting on an optical breadboard. It has four optical ports permitting measurement of fluorescence at 90 degrees to the excitation on either side of the excitation beam. Use the Luma 40 for normal temperature ranges of -15 °C to +105 °C. Add a windowed jacket, purge with dry gas and run the temperature down to at least -40 °C. Purchase the extended temperature option and extend the range up to +150 °C or down to -50 °C. Fluorescence is sensitive to temperature and reliable measurements require the precise temperature control of the Luma 40. Alternatively, take advantage of the additional optical ports and also use the Luma 40 when additional access at 90 degrees is required for photochemical studies. Operate the TC 1/Single Temperature Controller using the menu button, control via program T-APPor use the simple text commands of the TC 1/Single to write your own control program. Luma 40 是在一個簡單的基礎上安裝在光學面包板上。它有四個光學端口, 允許測量在90度的熒光激發在激發光束的兩側。對于-15°c 至 + 105°c 的常溫范圍, 請使用 luma 40。加入一個風夾克, 用干氣清洗, 并將溫度降至-40°c。購買擴展溫度選項, 并將范圍擴展到 + 150°c 或-50°c。熒光對溫度敏感, 可靠的測量需要對 luma 40 進行精確的溫度控制。或者, 利用額外的光學端口, 并使用 luma 40 時, 需要額外的90度的光化學研究。使用菜單按鈕操作 tc 半溫度控制器, 通過程序 t-app 進行控制, 或使用 tc 教數的簡單文本命令編寫您自己的控制程序。

Product Features產品特點

Four optical ports四個光學端口
Rapid, precise temperature control快速、精確的溫度控制
Optional extended temperature range?可選的擴展溫度范圍
Windowed jacket available for temperature extremes?可用于極端溫度的風裝夾克
Variable speed magnetic stirring?變速磁攪拌
Dry gas purge for work at low temperature?低溫工作用干氣凈化
Base and post for mounting on an optical breadboard?安裝在光學面包板上的底座和立柱
Probe input for sample temperature?樣品溫度的探頭輸入
NIST-traceable temperature calibration?nist 可追溯溫度校準

技術參數：