簡介：
高級靜態和動態摩擦系統RR/FT符合全部國際測試標準，先進的計算機控制，精確測量靜態和動態摩擦。操作簡單，所有的參數和測試結果顯示在易讀的液晶屏幕上；內置結果打印機給出測試結果和數據統計通過負載單元精確的測量樣品表面的摩擦系數，采用圖解法顯示動態摩擦系數，其自動校準的程序確保摩擦的準確性。操作簡單，參數及結果均可在LCD顯示器上顯示。RS232輸出端口，?Windows軟件程序，結果可用表格及圖解兩種方式輸出。溫度控制，壓板最高溫度可達120℃，最低溫度達0℃的冷卻器。通過使用計算機反饋循環程序來測量樣品表面的靜、動態摩擦系數。
儀器特點：
1.測量：靜態摩擦、動態摩擦、剝離測試
2.負載單元：標準1000g，也可提供更大的負載單元
3.滑板200g(63.5*63.5)符合國際標準
4.測試速度：最高1800mm/分鐘
5.測試距離：通過微處理器控制，最大350mm/min
6.可根據需要定制加熱臺和冷卻臺
7.工作臺溫度：每次測試都記錄并打印
8.帶有Windows軟件，RS232輸出端口
9.剝離測試：180°測試附件，可選擇其它附件
標準配置：

*?高級專業的微處理器控制
*?0-150?°C數字溫度測量、控制和顯示
*?高達1800mm/minute的不同速率
*?1kg裝載單元（可提供更大的）
*?180°針對壓力敏感材料的附加裝置
*?滿足客戶具體需要，符合ASTM和ISO?測試標準
*?符合所有的國際測試標準
*?圖表統計分析
*?每次測試時記錄和打印外圍床溫度
*?校正工具箱
*?液晶顯示
*?操作簡單的觸摸鍵盤
*?模式選擇
*?內置結果打印機
*?帶有特殊數據轉換的RS232輸出
*?軟件
儀器技術參數：

Product Description
The Static & Dynamic Friction (or Slip & Friction) Tester has been designed to determine the friction characteristics of materials. Primarily by pulling one surface over another. It is ideally suited where the production of a product relies on Film, Foil, Paper or Board sliding over machinery or another material for packaging purposes.

The advanced dedicated microprocessor control removes operator variability from the test procedure by controlling dwell time, sled movement etc, thereby giving high accuracy of results for both static and dynamic friction.

Designed in accordance with ASTM D1894 And ISO 8295 International test standards, This apparatus can be used with all types of flexible packaging, foils, paper, board, rubber, linoleum, textiles and leather. 180o peel or adhesion tests can also be performed, other attachments to any International test standard are available on request.

The on board microprocessor records the normal force required to produce the sliding motion using a very accurate load cell. The results are shown graphically on the PC so that both the static and sliding friction can be observed throughout the test. These results can be printed out via the on board mini printer or downloaded to the computer for analysis in Microsoft Excel.

A built in calibration can be carried out at any time by using the calibration kit provided.

Standard features include
Advanced dedicated microprocessor control, Touch membrane keypad for ergonomically simple data entry, Easy to read liquid crystal display, Sequence logic menu auto prompt selection, Built-in test results printer, RS232 output with special data transfer lead and Windows data link PC software, Tabular and graphical statistical analysis, Data file capture, Digital temperature display and control, Auto prompts for test procedures, calibration and test results, Variable speed sled velocity up to 1800 mm/minute, 1 kg load cell, 180? peel attachments for pressure sensitive material, Sleds to ASTM and ISO test standards, Templates to any International test standard supplied to customer’s specific requirements, Calibration kit including cord, plug and 500 gram weight, Ambient bed temperature recorded and printed for each individual test, Fully traceable certificate of calibration, Product user manual, CE mark of conformity.

Optional accessories available
Heated bed option, Freezer bed option, Larger load cells, Sleds to customers requirements.

Test Description
Determines the coefficient of starting and sliding friction of plastic film and other materials when sliding over itself or other substances at specified test conditions.

Part Numbers
RR/FT

Complies with Standard(s)
ISO 8295, BS 2782: Part 8: Method 824A, ASTM D1894