Heating platen 300 °C | Atlas 加熱臺板300°C |圖集

Description
描述
Specac’s Atlas Heated Platens have been designed for use with all Specac Atlas-series Hydraulic Presses to provide heated pressing surface up to 300oC temperature, with a load bearing capacity up to 15 tons. The platens are easily installed into Specac presses by replacing the upper pressing face bolster fixing with the top heated platen and placing the lower heated platen over the lower pressing face of the press.
specac阿特拉斯加熱壓板已適用于所有specac圖集系列液壓機提供熱壓面達300oC溫度，具有承載能力高達15噸。模板是很容易安裝到specac機通過更換上壓面支撐固定與頂部加熱滾筒和放置在下加熱壓板下壓面壓。
A digital automatic temperature controller with a stability of ±1°C is provided for control of the platens, and the lower heated platen is fitted with a permanent thermocouple that monitors the temperature close to the pressing surface of the platens. The support blocks of the platens that connect to the press, are water cooled to isolate the press from any direct heating effect of the platens and to allow for efficient heating and cooling cycles of operation. An inline flow safety cut out device is incorporated into the water flow tubing to switch off power to the platens if the water supply is cut or interrupted. PVC tubing and flow connectors are supplied with the heated platens for water cooling.
數字自動溫度控制器和一個穩定的±1°C提供的模板控制，和較低的加熱滾筒上裝有一個永久熱電偶檢測溫度接近的壓板壓面。那連接到新聞模板的支撐塊，是水冷分離記者從模板的任何直接加熱效果和允許操作高效的加熱和冷卻循環。內聯流安全切斷裝置納入水流量管關掉電源模板如果水供應被切斷或中斷。PVC管材和流動連接器提供冷卻水的加熱板。

Heating platen 300 °C | Atlas 加熱臺板300°C |圖集