產品介紹：
PP板是由PP共聚體混合而成，具有一個重大缺點，表面能非常低，導致粘合性非常低。電暈處理系統能顯著提高表面能，提高附著力。
木板和泡沫的電暈處理，能夠優化處理過程以及減少浪費，這對整個表面處理過程中是非常重要的。為了得到良好的結果，有必要在板的邊緣進行電暈放電。通過增加層的厚度，滾筒的壽命，以及邊緣放電，厚度可達50mm，電極可調節。
數字輸出形式可對電極高度進行調整，在處理瓦楞紙板時，重要的是腔體內部的限制，為了避免能量損失以及臭氧產生，內部腔體處理時，反電極的絕緣層限制了他們的處理能力。
| FEATURES: | |
| Easy to install and use | The system requires compressed air and the electrical connection. |
| Single or dual sided | Both single and dual sided treatment systems available. |
| Easy adjustment of treatment width | The stainless steel wire electrodes are easily adjusted in treatment width. This requires no change to the electrical power system. |
| Watt density control | In combination with the HV-X series power generator, the system will adjust the generator output power according to the line speed. |
| Parallel opening | A parallel sliding device with pneumatic cylinders enables easy access to the treating area for cleaning and maintenance. |
| Process control | In combination with the HV-X series power generator and PLC units the system can be monitored and adjusted very easily. |
| Cost efficient treatment process | Only electrical power is needed to achieve the effective treatment of foam and board, typically systems run from 1-4 kW depending on width and speed. |
| Safe and clean | The system is equipped with safety switches and interlocks to ensure safe use. The ozone filter system eliminates the ozone generated during the process. |
| Technical Specifications | FoamTEC Plasma Treater |
| Mains power | 3 Ph. 400 VAC or 230 VAC (others on request) |
| Treatment power | 200-4000 Watts |
| Compressed air | 5-6 bar dry & clean |
| Treatment area | Single or dual sided treatment. Max. 50 mm thick |
| Treatment width | 10-3000 mm |
| Line speed | 1-30 m/min (others on request) |
| Treatable materials | PP, PE, PVC, nylon, PC, PVR and others (non-conductive only) |
| Optional | Driven rollers for part movement |
| Control and connectivity | Complete with touch panel. (Standard – Proface) |
| Regulation compliance | CE – RoHs – WEEE |