SMART CHARGE 5 TRACER GAS CHARGING SYSTEM 示蹤氣體充氣系統

SMART CHARGE 5 TRACER GAS CHARGING SYSTEM 追蹤氣體充氣系統

The Smart Charge 5 is a fully automatic, custom configurable evacuation and tracer gas backfill system with built-in gross leak test. The system is ideally suited for pre-charging of product with tracer gas, such as Helium, Hydrogen or others prior to the leak test processes. It can also be used with any gas charging application that requires evacuation and subsequent pressurization of a test product.

Smart Charge 5是一款全自動、可自定義配置的排空和示蹤氣體充氣系統，內置總泄漏測試。該系統非常適合在泄漏測試過程之前用示蹤氣體（如氦氣、氫氣或其他氣體）預充產品。它也可以用于任何需要排空和隨后對測試產品加壓的充氣應用。

SMART CHARGE 5:?FEATURES

Main Features

  • Fastest response time in the industry (less than 0.5 seconds)
  • Tracer gas background suppression
  • Sensitivity to 5 x 10-8?atm cc/secs
  • Less than 3 minutes total start-up time
  • Fully automatic calibration sequence with built-in dual purpose gas leak
  • User selectable between helium and hydrogen sniffer
  • Front panel key lock-out
  • Sealed membrane keypad
  • Fully interactive system diagnostics with multilingual displays
  • High output (110dB) adjustable audio alarm業界最快的響應時間（小于0.5秒）

    示蹤氣體背景抑制

    靈敏度為5 x 10-8 atm cc/sec

    總啟動時間小于3分鐘

    內置雙重用途氣體泄漏的全自動校準序列

    用戶可選擇氦氣和氫氣嗅探器

    前面板鑰匙鎖定

    密封膜鍵盤

    具有多語言顯示屏的完全交互式系統診斷

    高輸出（110dB）可調音頻報警器

Flexible Communication Format

  • Option Full duplex RS232 communication
  • Option AC & DC PLC interfacing
  • Option Analog outputs
  • Option Data Link Software選配全雙工RS232通信

    選配交流和直流PLC接口

    選配模擬輸出

    選配數據鏈路軟件

SMART CHARGE 5:?CHARACTERISTICS

Options

  • Analog
  • User I/O
  • Printer
  • Low pressure feature, 0-20 psig
  • Nitrogen charge up 700 psig
  • Barcode scanner feature
TECHNICAL SPECIFICATIONS
PowerUniversal Voltage 110 vac or 220-Volt AC, 50 – 60 Hz, 6.5 amps nominal
Dimensions (WxHxD)344 x 395 x 618 mm 

13.5″ x 15.5″ x 24.4″ inches

Utility Fittings1?4” NPT female 

1?2” NPT female for Part Evacuation

Pressure TransducerResolution of 0.01 psi in vacuum mode, or in pressure mode. Accuracy of ± 0.25%.
ValvingFast acting pull type solenoid featuring epoxy
encapsulated design
ManifoldingSeamless tubing with compression fitting interconnects. Helium leak tested to
1.0 × 10-6 atm-cc/sec @ 700 psig
Product Evacuation PumpAir Driven Venturi Pump Providing ultimate vacuum level 25.5″ Hg
ElectronicsMicroprocessor-based programmable logic controller
GaugingDigital part pressure and leak rate displayed on operator interface

Related posts